Ohio Hi Point Auto Collision

Juniors Body Filler

2011-10-07T12:17:00.003-04:00

Juniors Kyle, Stephanie, Eric and Austin have their work cut out for them with this car borrowed from Auto Technology.

2010-12-21T13:41:00.001-05:00

Honda Civic in lab for an outside customer. Students must fabricate patch panels from scratch and weld them in to replace the rust holes in the body.

2010-12-21T13:40:00.000-05:00

The Chevy pickup truck with the finished cab corner.

2010-12-21T13:39:00.000-05:00

ACT I student Anthony gets the masking paper just right on the Honda.

2010-12-21T13:37:00.000-05:00

ACT I students Dustin and Brandonn try their hand at welding in a patch panel

2010-12-21T13:36:00.000-05:00

ACT I students Josh, Scott and Jordan practice welding in lab.

2010-12-21T13:35:00.000-05:00

ACT I student Curt grinding off some rust on Sam's door panel.

2010-12-21T13:33:00.000-05:00

ACT I students Shawn and Anthony get a Honda ready for paint.

2010-12-21T13:30:00.000-05:00

ACT I student Scott cutting some metal with the Plasma Cutter

2010-12-21T13:28:00.000-05:00

ACT I student Justin drilling out spot welds on a rocker panel.

2010-12-21T13:26:00.000-05:00

ACT I student Shawn grinding his repair area.

2010-12-21T13:24:00.001-05:00

ACT I student Dustin putting the final touches on his repair area before laying down some body filler.

2010-12-21T13:23:00.001-05:00

ACT I student Curt working on a grinder in lab. Students must be able to inspect and repair tools to keep everyone safe.

2010-12-21T13:21:00.001-05:00

ACT I student Anthony wet sanding a hood for refinish. All primer must be wet sanded before it can be painted.

2010-12-21T13:20:00.000-05:00

ACT I student Chris loves grinding metal in lab.

2010-12-21T13:19:00.001-05:00

ACT I student Jordan practicing his welding. Lab students must pass a hands-on welding test for grade in lab.

2010-12-21T13:17:00.000-05:00

ACT II student Trae with his first all over paint job for an outside customer.

2010-12-21T13:16:00.001-05:00

ACT II student Dylan welding in a cab corner on a Chevy pickup.

2010-12-21T13:10:00.000-05:00

ACT I students Chris and Shawn repairing a hood in lab

2010-11-14T12:55:00.000-05:00

Mr. Newland and Mrs. Swaney talking during Career Days.

2010-11-14T12:54:00.000-05:00

ACT I student Shawn grinding a panel in lab.

2010-11-14T12:53:00.000-05:00

ACT I student Scott working on a repair in lab.

2010-11-14T12:49:00.001-05:00

Mr. Newland with ACT II student Cody and ACT I student Anthony and Hi Point Ambassador Sammy during Career Days.

2010-11-14T12:46:00.001-05:00

ACT I student Curt removing a bumper from an S10 pickup in lab.

2010-11-14T12:44:00.000-05:00

ACT II student Cody doing his bookwork in lab.

2010-11-14T12:42:00.001-05:00

ACT I students Chris and Josh welding in lab.

2010-11-14T12:38:00.001-05:00

ACT I student Austin wet sanding the Chevy pickup in lab.

2010-11-14T12:37:00.000-05:00

Career Days Ambassadors Anthony and Sammy trying their hand at welding.

2010-11-14T12:30:00.000-05:00

ACT I student Anthony welding in lab.

2010-11-05T12:12:00.001-04:00

ACT II student Trae likes working on Mr. Krock's truck.

2010-11-05T12:10:00.001-04:00

ACT II student Mylan taping up a model car for paint. Mylan said a model car is just as hard to tape up as a real car.

2010-11-05T12:09:00.000-04:00

ACT II student Brandon with the model car he painted in lab.

2010-11-05T12:07:00.001-04:00

ACT II has a good start on their pulling tractor.

2010-11-05T12:06:00.000-04:00

ACT II student Dylan is really happy to work on Mr. Krock's truck.

2010-11-05T12:04:00.001-04:00

ACT I student Chris trying to get his dent repair just right for grade.

2010-11-05T12:02:00.000-04:00

ACT I students completing dent repairs.

2010-11-05T12:00:00.003-04:00

ACT I students getting graded on dent repairs in lab. Students had to pass an evaluation of their skill at dent repair.

2010-11-05T12:00:00.001-04:00

ACT I student Dustin is just happy to be here.

2010-11-05T11:59:00.000-04:00

ACT I student Jordan working on dent repair.

2010-11-05T11:58:00.000-04:00

ACT I student Jacob prepping a dent for repair.

2010-11-05T11:55:00.001-04:00

ACT I students Shawn and Chris practicing dent repair in lab.

2010-06-08T13:36:00.000-04:00

2010-05-19T09:15:00.000-04:00

ACT II student Dillon taping up his 70's vintage MG for paint. This is his senior project car.

2010-05-19T09:13:00.002-04:00

ACT I students lay out the tape stripes for the Custom Paint car in Auto Collision. Students are studying custom paint in lab using a 2000 Honda donated by the East Liberty Honda plant.

2010-05-19T09:11:00.001-04:00

ACT I students Trae and Derrick cut out tape designs for the Custom Paint car in Auto Collision.

2010-05-19T09:10:00.000-04:00

Unmasking the Custom Paint car's front end after painting the hood.

2010-05-19T09:09:00.000-04:00

Taping and painting the Custom Paint car for Auto Collision.

2010-05-19T09:07:00.000-04:00

Front view of the Custom Paint Car painted by the Auto Collision class.

2010-05-19T09:06:00.000-04:00

Side view of the Custom Paint Car painted by the Auto Collision class.

2010-05-19T09:04:00.000-04:00

Side view of the Custom Paint Car painted by the Auto Collision class.

2010-05-19T09:03:00.000-04:00

Back view of the Custom Paint Car painted by the Auto Collision class.

2010-05-07T10:56:00.001-04:00

Richard Markham with the Junior Auto Collision Class. Richard is a nationally known airbrush artist currently an Instructor at Ohio Technical College. Richard brought his mobile airbrush studio to Ohio Hi Point Career Center to inspire students to live their dreams and show off his work. His work can be seen at www.richardmarkham.com

2010-05-07T10:55:00.000-04:00

Inside the Mobile Airbrush Studio for Richard Markham and Ohio Technical College.

2010-05-07T10:54:00.000-04:00

Inside the Mobile Airbrush Studio for Richard Markham and Ohio Technical College.

2010-05-07T10:53:00.000-04:00

Inside the Mobile Airbrush Studio for Richard Markham and Ohio Technical College.

2010-05-07T10:52:00.002-04:00

An airbrushed picture inside the airbrush mobile studio for Ohio Technical College.

2010-05-07T10:52:00.001-04:00

An airbrushed picture inside the airbrush mobile studio for Ohio Technical College.

2010-05-07T10:50:00.000-04:00

An airbrushed picture inside the airbrush mobile studio for Ohio Technical College.

2010-05-07T10:49:00.000-04:00

The "Devil Car" built by Richard Markham and Ohio Technical College.

2010-05-07T10:48:00.000-04:00

The "Devil Car" built by Richard Markham and Ohio Technical College.

2010-05-07T10:47:00.000-04:00

The "Devil Car" built by Richard Markham and Ohio Technical College.

2010-05-07T10:46:00.000-04:00

The "Devil Car" built by Richard Markham and Ohio Technical College.

2010-05-07T10:45:00.002-04:00

The "Ice Car" built by Richard Markham and Ohio Technical College.

2010-05-07T10:45:00.001-04:00

The dashboard of the "Ice Car" built by Richard Markham and Ohio Technical College.

2010-05-07T10:44:00.000-04:00

The dashboard of the "Ice Car" built by Richard Markham and Ohio Technical College.

2010-05-07T10:43:00.000-04:00

The "Ice Car" built by Richard Markham and Ohio Technical College.

2010-05-07T10:41:00.000-04:00

The "Pumping Iron Car" built by Richard Markham and Ohio Technical College.

2010-05-07T10:40:00.000-04:00

The "Pumping Iron Car" built by Richard Markham and Ohio Technical College.

2010-05-07T10:39:00.000-04:00

The "Pumping Iron Car" built by Richard Markham and Ohio Technical College.

2010-05-07T10:37:00.000-04:00

The "Pumping Iron Car" built by Richard Markham and Ohio Technical College.

2010-05-07T10:36:00.000-04:00

The "Pumping Iron Car" built by Richard Markham and OTC.

2010-05-07T10:34:00.001-04:00

The "Pumping Iron Car" done by Richard Markham and Ohio Technical College. This car was built for the Arnold Schwarzenegger Iron Man Classic.

2010-05-07T10:30:00.001-04:00

The "Pumping Iron Car" done by Richard Markham of Ohio Technical College.

2010-05-06T12:17:00.001-04:00

ACT II students Kelley and KP working on Kelley's quarter panel trying to get the dent repaired.

2010-05-06T12:15:00.000-04:00

ACT II students Tyler and Josh taping up a lab car for two tone paint practice.

2010-05-06T09:18:00.001-04:00

ACT II students Eli and Winston finishing the Camaro bumper cover.

2010-05-06T09:17:00.000-04:00

The Camaro is getting finished!!

2010-04-21T09:11:00.000-04:00

The Camaro is sanded and ready to wash and tape up for paint.

2010-04-21T09:09:00.002-04:00

Eli must wet sand this Camaro to prep it for paint. Most customers don't realize how much prep and repair work is involved in an all-over paint job. On average it takes about 20 hours to prep and repair and only about 2 hours to paint the vehicle.

2010-04-21T09:06:00.002-04:00

After finishing Mr. Peterson's Honda Eli got right back to work on his next job. This time he is getting a customer's 1985 Camaro ready for paint.

2010-04-21T09:04:00.001-04:00

The passenger side of the MG with the floor pan getting repaired. Sometimes it's better to repair than to replace panels during a resoration.

2010-04-21T09:03:00.000-04:00

The drivers side of the MG with the old floor pans cut out.

2010-04-21T09:01:00.000-04:00

ACT II student Dillon is putting floor pans in this MG.

2010-04-21T08:59:00.001-04:00

Mr. Peterson's Honda custom painted by the Collision Lab. ACT II student Eli and ACT I student Dylan put on color coats with a dark gray-green mettalic then put a marble effect stripe down the side.

2010-04-21T08:49:00.000-04:00

ACT II student Eli with Mr. Peterson's Honda he painted.

2010-03-18T14:49:00.001-04:00

ACT II student Kelley painting his practice panel.

2010-03-18T14:47:00.000-04:00

ACT II student Dillon spraying basecoat paint. Just look at the concentration it takes to paint correctly.

2010-03-18T14:45:00.001-04:00

Mr. Newland helping Josh get his paint gun adjusted correctly. A paint gun is only as good as the technician using it. Knowing how to adjust and use a paint gun properly will result in a good professional looking paint job.

2010-03-18T14:44:00.001-04:00

ACT II student Eli spraying his practice panel with clearcoat. Good hand-eye coordination is key to being a good painter.

2010-03-18T14:43:00.000-04:00

Mr. Newland showing Kevin the finer points of spraying basecoat.

2010-03-18T14:41:00.000-04:00

ACT II student Kevin spraying his panel in lab.

2010-03-18T14:39:00.001-04:00

ACT II student Dalton sprays his practice panel as Kelley and Eli look on.

2010-03-18T14:36:00.001-04:00

ACT I student Dylan looks on as Derrick sprays basecoat paint. Wes and Trae discuss the finer points of painting in the background.

2010-03-18T14:35:00.000-04:00

ACT I student Trae getting the hang of spraying basecoat paint.

2010-03-18T14:34:00.000-04:00

ACT II student Winston taping up the first car in the booth for primer.

The Paint Booth is Open for Business!!

2010-03-18T14:32:00.001-04:00

ACT I students Mylan and Brandon spraying practice panels with basecoat paint.

2010-02-25T12:54:00.000-05:00

Masonry students working on the wall in the Collision Lab.

2010-02-25T12:53:00.001-05:00

Masonry students putting block on the wall in the Collision Lab.

2010-02-25T12:51:00.002-05:00

Mr. Hedges Masonry lab finishing the wall inn the Collision Lab.

2009-12-08T14:39:00.002-05:00

Making repairs on the front bumper cover for the white Camaro. In Auto Collision, we learn to repair plastic bumper covers by using adhesives and by using a plastic welder. Once the plastic is repaired we primer the area and get the cover ready for paint. More pictures to follow as we finish this repair.